Hunza Bollard 700mm (Spike Mounted) - Stainless Steel - Low Voltage

Brushed Stainless Steel for Low Voltage Lighting

Standing 700mm tall on its spike, this Hunza bollard is a crisp, understated post made from marine grade 316 stainless steel. It throws low level light across paths, drives, lawns and car parks without drawing attention to itself in daylight. It is the low voltage option, with a GU10 mains version available alongside it.

Marine Grade 316 Stainless Steel

Hunza uses 316 stainless steel here, which keeps a consistent brushed finish. In some environments it can pick up a light surface tarnish, and a regular wash keeps that in check. If you would like a finish that ages visibly, the same bollard comes in solid copper, and there is a powder coated aluminium version in a range of colours too.

How It Works

• Behind the UV stable acrylic lens and anti glare mesh sits a mirror finish, twin angle reflector.
• Light is sent in two directions: onto the ground directly beneath, and horizontally to take in the landscape around.
• Dimensions are 63.5mm diameter by 685mm high, with 1m of cable supplied.
• It runs on low voltage wired in parallel and needs a transformer.
• No lamp is included. Fit a Hunza approved LED MR16 to keep the IP rating and warranty.
• IP66 rated and covered by a 10 year warranty.

Where It Works Best

• Beside paths that cross a lawn
• At the corners of a drive or hard standing
• In contemporary gardens where a clean metal look suits the planting
• Near seating or steps, where a soft glow helps people see their footing

How We Plan and Install Hunza Lighting

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. On our Design Service page you will find project photographs of our own completed lighting, along with a walk through of how we plan and draw up a scheme. It is worth a look before you finalise a layout.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The lamp is not included and the transformer is sold separately.
• Stainless steel can show a light surface tarnish in some environments. Regular washing keeps it in check.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

What grade of stainless steel is used?
The listing gives marine grade 316 stainless steel.

Will it rust or tarnish?
316 stainless keeps a consistent brushed finish, though a light surface tarnish can appear in some environments and regular washing keeps it in check.

What do I need to buy besides the bollard?
A Hunza approved MR16 LED lamp and a transformer, as the bollard is low voltage and ships without either.

Is it suitable for wet weather?
It is rated IP66 and carries a 10 year warranty, provided a Hunza approved LED is used.

Diameter: 63.5mm
Height: 685mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza MR16 and GU10 Bollard BOL700 Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.