Hunza Bollard 700mm GU10 (Spike Mounted) - Stainless Steel - Mains

Stainless Steel Mains Bollard on a Spike

Here is a Hunza bollard for people who want mains power and a clean metal look. It is a 700mm GU10 post in 316 stainless steel, mounted on a spike, that lights paths, lawns, drives and car parks from a low height. Nothing extra is needed to power it, as no driver is required.

Brushed 316 Stainless

Marine grade 316 stainless steel gives this bollard a consistent brushed finish. A light surface tarnish can appear in some environments, so an occasional wash is a good habit. Solid copper and powder coated aluminium versions exist if you want something warmer or more colourful.

How It Works

• Light passes through a UV stable acrylic lens with anti glare mesh, after bouncing off a mirror finish, twin angle reflector.
• The reflector lights the ground directly below and sends a second beam out sideways across the surroundings.
• The body is 63.5mm across and 685mm high.
• Mains voltage with no driver required, wired in parallel.
• It takes a GU10 lamp that is not supplied. Choose a Hunza approved LED to keep the IP rating and warranty.
• Rated IP66, with a 10 year warranty.

Where It Works Best

• Pushed into a lawn edge or planted border
• Beside a garden path that already has a mains supply nearby
• At the end of a drive where you want a tidy marker light
• In public or shared outdoor spaces that need robust lighting

Our Lighting Design Service

Moonlight Design has worked with Hunza since 2003. Designing garden lighting schemes, supplying Hunza fittings and installing them with NICEIC registered electricians is part of what we do. The project photographs on our Design Service page are our own completed schemes, and the page explains how we plan and draw them up. We would be glad if you visited it.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The GU10 lamp is sold separately.
• 316 stainless steel may show a light surface tarnish in some environments.
• Mains wiring should be done by a registered NICEIC electrician, which we recommend.

Questions People Ask

Do I need a transformer with this bollard?
No. It is a mains GU10 fitting and no driver is required.

What lamp does it take?
A GU10 lamp, not supplied. It should be a Hunza approved LED to keep the IP66 rating and warranty.

How tall is it?
The body is 685mm high and 63.5mm in diameter.

How long is the warranty?
The stainless steel version carries a 10 year warranty.

Diameter: 63.5mm
Height: 685mm
(refer to spec for more information)

• Hunza MR16 and GU10 Bollard BOL700 Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.