Hunza Bollard 700mm GU10 (90mm Flange Mounted) - Powder Coat - Mains

A GU10 Bollard on a 90mm Flange

This Hunza bollard takes a standard GU10 lamp, runs straight from the mains and bolts down on a 90mm diameter flange. Standing 688mm tall, it throws low level light over drives, paths, walkways and car parks. Because it is a mains fitting, there is no driver or transformer to find room for.

Powder Coat in Seven Colours

The finish is powder coated aluminium, with a baked on colour in Black, Dark Grey, White, Birch, Bronze, Olive Green or Silver Star. Colour shown on screen is indicative only, and swatches can be sent on request. The same bollard is also made in solid copper and 316 stainless steel, should you prefer a metal finish.

How It Works

• A mirror finish, twin angle reflector and UV stable acrylic lens with anti glare mesh shape the light.
• Part of the beam goes straight to the ground and part goes sideways, lighting the landscape around the post.
• The body is 63.5mm in diameter and 688mm high, and the flange measures 90mm across.
• Mains powered with no driver required, and wired in parallel.
• GU10 lamp not supplied. Fit a Hunza approved LED to maintain the IP rating and warranty.
• Dimmable, provided dimmable LEDs are installed.
• IP66 rated with a 5 year warranty.

Where It Works Best

• On a paved or concrete base beside a driveway
• Where a mains supply is easier to run than low voltage cable
• Along a gravel path edged with a firm base
• Around car parks and shared access roads

Planning Your Scheme With Us

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page carries project photographs of our own completed lighting schemes and shows how we plan and draw them up. Have a look if you would like help choosing positions.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Matt Black and Matt Bronze can be returned within 14 days of delivery if unused, uninstalled and in original packaging.
• Matt Olive Green, Matt White, Matt White Birch, Matt Dark Grey and Matt Silver Star are made to order and non returnable unless faulty or damaged.
• The GU10 lamp is sold separately.
• Mains fitting, so installation must be carried out by a qualified electrician. We recommend a registered NICEIC electrician.

Questions People Ask

Does it need a driver or transformer?
No. This is a mains fitting and no driver is required.

Can I dim it?
Yes, provided dimmable LED lamps are installed.

How wide is the flange?
The flange is 90mm in diameter and the body is 63.5mm in diameter.

Is the lamp included?
No. You buy a Hunza approved GU10 LED separately, which keeps the IP66 rating and 5 year warranty valid.

Body
Diameter: 63.5mm
Height: 688mm

Flange
Diameter: 90mm
(refer to spec for more information)

• Hunza MR16 and GU10 Bollard BOL700 Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.