




Hunza Arch Square Bollard Direct Burial - Powder Coat - Mains

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Square Bollard You Bury, With the Driver Already Inside
The direct burial Hunza Arch Square Bollard has a flat sided post and a cube shaped head, and its constant current driver is supplied and installed inside the fitting. That means it connects to the mains without a separate driver. The pole is 1200mm tall as standard and is set straight into concrete or earth. Hunza describes it as extremely low glare with precise light placement, for driveways and pathways.
Nine Powder Coat Finishes
Choose from Matt Black, Matt Bronze, Matt Dark Grey, Matt Olive Green, Matt Silver Star, Matt White, Matt White Birch, Corten and Fine Silver. The post is 100mm wide and 60mm deep, and the head reaches out to 185mm overall. Colours on screen vary, so ask us for a swatch before you choose a finish. The same bollard is also made as a flange mount version.
How It Works
- An integral constant current driver, supplied and installed, takes a mains input of 90 to 264VAC at 26 watts. The fitting must be earthed.
- A Cree CXB 1830 LED board that is field replaceable, giving 3,000 lumens at 700mA from 26 watts, which Hunza lists as 115 lumens per watt delivered.
- CRI is 90 or higher at 3000K, and the LED life is 50,000 hours to L70.
- Choose a Long Narrow Beam (Type 2) to send light a long way in a narrow strip, a Forward Throw (Type 4) to fan it out in front of the bollard, or a Wide Spread (95 Degree) for a broad, even spread. Each comes in 2700K, 3000K or 4000K.
- The lens is extra clear optical silicone, and the fitting is IP66 rated.
- The warranty is 5 years on the aluminium and 5 years on the electronics, excluding third party lamps and power supplies. Hunza lists the weight as 6kg.
Where It Works Best
- Lining a driveway where you want mains power without a remote driver
- Along formal garden paths and entrance routes
- Around courtyards, car parks and shared walkways
- In schemes where you want a crisp, squared off look to match modern architecture
Planning Your Scheme With Us
Moonlight Design has worked with Hunza since 2003. We design outdoor lighting schemes, supply the fittings and install them with NICEIC registered electricians. The Design Service page shows photographs of our own finished projects and how a scheme is planned, drawn up and fitted, which helps when you are deciding how far apart bollards should be spaced.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Arch fitting is made to order, so it cannot be returned unless it is faulty or damaged.
- The driver is integral, supplied and installed, so no separate driver is needed. The fitting must be earthed.
- Hunza lists custom pole heights from 150mm to 2000mm, so ask us if you need a different height.
- Photographs show the black finish. Every finish is the same shape.
- Hunza also makes DarkSky Approved versions of the Arch range. The DarkSky Approved Luminaire certificates for the range are attached to this page as downloads, and you can ask us about the DarkSky versions.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
Does the direct burial Arch Square Bollard need a separate driver?
No. It has an integral constant current driver, supplied and installed, which runs from a mains input of 90 to 264VAC.
What colours can I choose?
There are nine finishes: Matt Black, Matt Bronze, Matt Dark Grey, Matt Olive Green, Matt Silver Star, Matt White, Matt White Birch, Corten and Fine Silver. All are powder coated aluminium. Ask us for a swatch before you choose.
How big is it?
The post is 100mm wide and 60mm deep, the standard height is 1200mm, and the head projects to 185mm overall.
Which beam should I choose?
Choose the Long Narrow Beam (Type 2) to light along a path or wall, the Forward Throw (Type 4) to cover a wider area in front of the bollard, or the Wide Spread (95 Degree) for a broad, even spread of light.
Is there a DarkSky Approved version?
Hunza makes DarkSky Approved versions of the Arch range, and the DarkSky certificates are attached to this page. Ask us if you need that version.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us












