



Hunza Arch Round Bollard Flange Mount - Powder Coat - Mains

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Round Bollard on a Flange Base Plate
The flange mount Hunza Arch Round Bollard stands 1000mm tall on a 250mm diameter base plate, ready to bolt down to a slab or paved surface. It has the same cylindrical head as the direct burial version, 115mm across and 115mm tall, and the same integral mains driver, supplied and installed inside the fitting. The head projects to 185mm overall on Hunza's flange mount drawing.
Choose a Finish
There are nine powder coat finishes: Matt Black, Matt Bronze, Matt Dark Grey, Matt Olive Green, Matt Silver Star, Matt White, Matt White Birch, Corten and Fine Silver. Colours on screen vary, so ask us for a swatch before you choose a finish. If you want the pole set into the ground at 1200mm, look at the direct burial version.
How It Works
- An integral driver, supplied and installed, takes 90 to 264VAC at 26 watts. The luminaire must be earthed.
- A Cree CXB 1830 LED board that is field replaceable, giving 3,000 lumens at 700mA from 26 watts, which Hunza lists as 115 lumens per watt delivered.
- CRI is 90 or higher at 3000K, and the LED life is 50,000 hours to L70.
- Choose a Long Narrow Beam (Type 2) to send light a long way in a narrow strip, a Forward Throw (Type 4) to fan it out in front of the bollard, or a Wide Spread (95 Degree) for a broad, even spread. Each comes in 2700K, 3000K or 4000K.
- The 250mm diameter base plate bolts down, and a mounting cage is available for flange mounting, so ask us if you need one.
- IP66 rated, with 5 years on the aluminium and 5 years on the electronics. Hunza lists the weight as 6kg without the flange mount.
Where It Works Best
- On a patio or terrace where the paving is laid over a slab
- Along a path edged with a concrete kerb
- Beside entrance steps that need a low marker light
- Wherever a bolted down, serviceable fixing suits better than digging
Planning Your Scheme With Us
Moonlight Design has worked with Hunza since 2003. We design lighting for gardens, paths and driveways, supply Hunza fittings and install them with NICEIC registered electricians. You can see our own finished projects on the Design Service page, together with how we plan and draw up a layout.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Arch fitting is made to order, so it cannot be returned unless it is faulty or damaged.
- The driver is integral, so no separate driver is needed. The fitting must be earthed.
- Photographs show the bronze finish. Every finish is the same shape.
- Hunza lists custom pole heights from 150mm to 2000mm.
- Hunza also makes DarkSky Approved versions of the Arch range. The DarkSky Approved Luminaire certificates for the range are attached to this page as downloads, and you can ask us about the DarkSky versions.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
How tall is the flange mount Arch Round Bollard?
The standard height is 1000mm on a 250mm diameter base plate, with a 115mm diameter head.
What colours can I choose?
There are nine finishes: Matt Black, Matt Bronze, Matt Dark Grey, Matt Olive Green, Matt Silver Star, Matt White, Matt White Birch, Corten and Fine Silver. All are powder coated aluminium. Ask us for a swatch before you choose.
Is the driver included?
Yes. It is an integral constant current driver, supplied and installed, for a mains input of 90 to 264VAC.
Which beam should I choose?
Choose the Long Narrow Beam (Type 2) to light along a path or wall, the Forward Throw (Type 4) to cover a wider area in front of the bollard, or the Wide Spread (95 Degree) for a broad, even spread of light.
Is there a DarkSky Approved version?
Hunza makes DarkSky Approved versions of the Arch range, and the DarkSky certificates are attached to this page. Ask us if you need that version.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us















