Collingwood WL220 LED Wall Light - Bronze - Straight to Mains

A Directional Spotlight Built for the Outside of the House

The Collingwood WL220 is a compact LED wall light designed to throw a controlled beam across brick, render or stone rather than just glow at the wall. Its cylindrical head houses a 5.7W LED with a 40 degree beam angle, rated at roughly 515 to 530 lumens depending on which colour temperature you choose, so it has enough punch to pick out a doorway, a run of steps or a section of planting without washing out the whole facade.

The Bronze Finish

This version comes in a warm bronze anodised aluminium finish that reads more like aged metal than painted steel. It sits comfortably against red brick, natural stone or timber cladding and tends to disappear into the wall in daylight rather than standing out as an obvious fitting. Collingwood also makes the WL220 in stainless steel, black and copper, so bronze is the one to reach for on a period house or anywhere you want the fitting itself to stay understated.

How It Works

Because this is the straight to mains version, the WL220 wires directly into a standard lighting circuit with no separate driver or transformer to find space for, using parallel wiring. The head tilts through 90 degrees and rotates through 360 degrees on its base, so you can angle it up a wall, down onto a path or straight ahead along a boundary. It isn't compatible with dimmer switches, so it runs at a fixed output once wired in. Moonlight Design recommends installation by a registered NICEIC electrician.

Where It Works Best

This is an exterior fitting first and foremost, built for house fronts, side returns, garden walls and steps where you want a defined pool or wash of light rather than broad floodlighting. Its IP65 rating means it copes with driving rain and coastal exposure as well as ordinary UK weather. That same IP65 rating also clears the requirements for the wettest bathroom zones, so the same fitting and beam control can be used indoors over a bath or in a shower enclosure if you want it there too. Read Moonlight's guide to bathroom lighting zones before you plan the position.

About Collingwood Lighting

Collingwood designs and manufactures its LED fittings from Sywell in Northamptonshire and has worked solely in LED technology since 2002. The brand states it was among the first to bring fire rated, fully sealed for life and mains dimmable LED products into the UK electrical wholesale market, part of a broader push to get mains voltage LED lighting into everyday installations. It has also been awarded an EcoVadis Gold medal, placing it in the top 5% of companies assessed globally for sustainability.

Good to Know

• Comes with a 7 year manufacturer warranty.
• IP65 rated, dust tight and protected against low pressure water jets from any direction, so it suits exposed exterior walls and wet indoor rooms alike.
• Class I electrical, meaning it must be properly earthed as part of the installation.
• Not compatible with dimmer switches, this straight to mains version always runs at its fixed output.
• Sold as three separate fixed colour temperature variants, 2700K, 3000K or 4000K, so choose the one you want at the point of purchase.
• Colour rendering index of 80, a reasonable standard for showing true colour on brickwork, stone and planting.
• Compact at 80mm in diameter and 145mm deep, weighing around 0.5kg, so it sits on a single brick course without needing heavy fixings.
• Body is anodised aluminium, wipe clean with a soft dry cloth and avoid abrasive cleaners on the finish.
• Moonlight Design recommends installation by a registered NICEIC electrician.

Questions People Ask

• Does the WL220 bronze wall light need a separate driver or transformer? No, this straight to mains version has its power supply built into the fitting and connects directly to a standard mains lighting circuit using parallel wiring.
• Can the WL220 be dimmed? No, this straight to mains version of the WL220 is not compatible with dimmer switches and always runs at its fixed output.
• How far does the head move once it's fitted? The head tilts through 90 degrees and rotates through 360 degrees on its base, giving a wide range of adjustment for aiming the beam at a wall, a path or a doorway.
• Is the bronze WL220 suitable for coastal or wet locations? Yes, it carries an IP65 rating, meaning it is dust tight and protected against water jets from any direction, which covers coastal properties and even the wettest bathroom zones.
• What colour temperatures is the WL220 bronze available in? It is sold as three separate fixed colour temperature variants, 2700K extra warm white, 3000K warm white and 4000K cool white, each around 515 to 530 lumens.

80mm diameter x 145mm depth

• Collingwood Wall Light Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.