Buster + Punch UK Kitchen Tap Pull-Out Mixer - Linear Knurl

Reach Every Corner Of The Sink

The pull out version of the Buster + Punch linear knurl tap. The nozzle lifts out of the spout on a 1.7 metre hose and gives you an extra 45cm of reach, so filling a stock pot on the worktop or rinsing down the far corner of a big single bowl sink stops being a stretch. Cast, sand blasted and machined from solid metal in Italy, with parallel linear knurl grooves on both the lever and the pull out nozzle.

Choose Your Finish

Brass brings a warm, aged metal look that suits timber and darker stone, Steel keeps the tap neutral alongside stainless sinks and ovens, and Welders Black gives a crisp graphic outline on lighter worktops.

How It Works

A single lever and ceramic cartridge mix hot and cold from your existing pipework, the spout swivels through 360 degrees, and the nozzle pulls free on its hose and retracts when you let go. Working range 5 to 60°C, maximum hot supply 70°C, water pressure 0.7 to 5 bar.

Where It Works Best

Worktops up to 70mm thick. Unlike the fixed spout mixers there is no longer bolt option beyond that, so check your counter depth first. UK 1/2 inch and EU 3/8 inch flexible connectors are both included. It is the practical choice for a family kitchen or anywhere the sink doubles as a prep station.

Made By Buster + Punch

Buster + Punch makes hardware first and everything else second, and it shows in a tap that is cast and machined rather than plated and glued. The linear knurl here matches the brand's cabinet pulls, T bars and light switches, and each tap carries a small acid etched B+P insignia.

Good To Know

• Height 372mm, spout reach 261mm, spout diameter 48mm, lever height 104mm
• Solid metal body, cast and machined in Italy, WRAS certified, conforms to EN817
• Single lever ceramic cartridge mixer, 360 degree swivel spout
• Pull out hose 1.7m, extraction length approximately 45cm from the end of the spout
• Fits worktops up to 70mm thick, no fixings available beyond that
• Working pressure 0.7 to 5 bar, tested to 10 bar
• In the box: pull out mixer tap, two flexible connector hoses, tap base and washers, threaded bar and nut, supporting brace for thin surfaces, adjustable spanner
• Warranty: two year Buster + Punch manufacturer's warranty

Questions People Ask

How far does the nozzle pull out?
Around 45cm beyond the end of the spout, on a 1.7 metre hose that retracts into the body when released.

Can I fit it on a 80mm worktop?
No. The pull out mixers are limited to 70mm. For a thicker counter look at the fixed spout mixer, which can take a longer bolt up to 180mm.

Height 372mm x Projection 261mm x Width 48mm (Lever Height 104mm)

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.