Buster + Punch UK Kitchen Tap Mixer - Cross Knurl

The Everyday Tap, Built Like Hardware

The standard single lever mixer in the Buster + Punch kitchen range, and the one that suits most sinks. It is cast, sand blasted and precision machined from solid metal in Italy, then finished by hand, with the brand's diamond pattern cross knurl cut into the lever and the aerator cap at the end of the spout. No pull out hose and no boiling water tank, just a well made mixer that will be touched fifty times a day.

Choose Your Finish

Brass warms up a timber or stone worktop, Steel is the neutral choice that sits happily with stainless sinks and appliances, Gun Metal gives a darker, smokier metal that reads as grey rather than black, and Welders Black turns the tap into a sharp silhouette against a pale counter.

How It Works

A single lever lifts to open and swings to mix hot and cold from your existing kitchen pipework, with a ceramic cartridge inside controlling the flow. The spout swivels through 360 degrees and the aerated stream keeps splashing down. It is designed for a working range of 5 to 60°C, a maximum hot supply of 70°C and water pressure between 0.7 and 5 bar.

Where It Works Best

Worktops up to 45mm thick with the fixings supplied, and Buster + Punch can supply a longer securing bolt for thicker tops up to 180mm. UK 1/2 inch and EU 3/8 inch flexible connectors are both in the box. It pairs naturally with the brand's cross knurl cabinet pulls and switches if you want the same pattern running through the kitchen.

Made By Buster + Punch

Buster + Punch started with motorbikes and door furniture in a London workshop, and the kitchen taps follow the same logic as the handles: solid metal, machined rather than pressed, and a knurl you can feel. Every tap carries a subtle acid etched B+P insignia.

Good To Know

• Height 372mm, spout reach 253mm, spout diameter 48mm, lever height 104mm
• Solid metal body, cast and machined in Italy, WRAS certified, conforms to EN817
• Single lever ceramic cartridge mixer, 360 degree swivel spout
• Worktop thickness up to 45mm as supplied, up to 180mm with an optional longer bolt
• Working pressure 0.7 to 5 bar, tested to 10 bar
• In the box: mixer tap, two flexible connector hoses, tap base and washers, threaded bar and nut, supporting brace for thin surfaces, adjustable spanner
• Care: wipe with a lint free cloth, avoid chemicals, finishes age naturally with use
• Warranty: two year Buster + Punch manufacturer's warranty

Questions People Ask

What is the difference between this and the pull out mixer?
This is a fixed spout. The pull out version has a nozzle on a 1.7 metre hose for rinsing and filling pots away from the spout.

Does it work with a thick stone worktop?
The supplied fixings suit tops up to 45mm. For anything thicker, up to 180mm, ask us for the longer securing bolt before your plumber books in.

Height 372mm x Projection 253mm x Width 48mm (Lever Height 104mm)

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.