Buster + Punch UK Kitchen Hot Tap 4 in 1 - Linear Knurl

Boiling, Filtered, Hot And Cold From One Spout

The 4 in 1 is the Buster + Punch kitchen tap for people who have stopped wanting a kettle. One spout, two levers: the right hand lever is a normal hot and cold mixer fed from your kitchen pipework, the left hand lever gives filtered cold water or near boiling water from the compact tank that comes in the box. The tap itself is cast, sand blasted and machined from solid metal in Italy, finished by hand, with the parallel groove linear knurl worked into both levers.

Choose Your Finish

Brass for warmth, Steel for a neutral match with stainless appliances, Gun Metal for a deep grey with less glare than black, and Welders Black for a hard edged outline on a pale worktop. The cross knurl version is listed separately if you prefer that texture.

How It Works

The under sink tank holds 2.4 litres and heats it to a choice of 75°C for warm drinks and cordials, 96°C, or 98°C for tea and pans, with a touch screen LED display on the tank for setting the temperature. Water on the hot and filtered side passes through the filter kit, which has a phosphate bead core to hold back limescale. The spout swivels through 360 degrees and both levers run on ceramic cartridges. The tank runs on a standard 220 to 240V supply at 1500W and is WRAS approved.

Where It Works Best

Worktops between 0.5mm and 45mm thick with the supplied fixings, UK 1/2 inch and EU 3/8 inch connectors in the box, and a cupboard under the sink with a socket for the tank. Water pressure should sit between 0.5 and 5 bar; above that the Buster + Punch pressure regulator valve is needed to protect the tank. Because the tap, tank and filter kit are supplied together it is a straightforward spec for a new kitchen or a refit.

Made By Buster + Punch

Buster + Punch built its reputation on knurled door handles and switches before it made taps, and the 4 in 1 is the hardware brand's answer to the boiling water tap: a solid casting with a real machined texture and a quiet acid etched B+P mark, rather than a plated appliance.

Good To Know

• Height 419.5mm, spout reach 240mm, width across the levers 188.5mm, lever height 124.5mm
• Four functions: ambient cold, filtered cold, instant hot at 75, 96 or 98°C, and a standard hot and cold mixer
• Solid metal body, cast and machined in Italy, conforms to EN817, ceramic cartridges, 360 degree swivel spout
• 2.4 litre non pressurised tank, 220 to 240V 50Hz, 1500W, WRAS approved, LED touch screen, tank 342mm tall by 232mm by 232mm
• Worktop thickness 0.5 to 45mm, water pressure 0.5 to 5 bar
• In the box: 4 in 1 tap, instant hot water tank, filter kit, fittings kit
• The water filter must be changed every six months to keep the guarantee valid; the replacement filter is listed separately
• Care: damp cloth only, no chemicals, finishes age naturally
• Warranty: two year Buster + Punch manufacturer's warranty

Questions People Ask

Is the tank included?
Yes. The 2.4 litre hot water tank and the filter kit both come in the box, so you only need to add the replacement filter every six months.

Does it need a plumber and an electrician?
A plumber for the tap and tank connections, and a socket under the sink for the tank. Buster + Punch ask that a trade professional handles the installation.

What if my water pressure is high?
Anything over 5 bar needs the Buster + Punch pressure regulator valve fitted upstream of the tank. A plumber can test the pressure before fitting.

Height 419.5mm x Projection 240mm x Width 188.5mm (Lever Height 124.5mm); tank 342mm x 232mm x 232mm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.