Buster + Punch Punch Puck Bulb E27 2700k - Non-Dimmable

The Puck That Skips the Dimmer

This is the non-dimmable version of the Punch Bulb Puck, the same small, opal shelled bulb that spreads a uniform, warm white light rather than the focused pool of the teardrop shaped Buster Bulb. Built for standard switches, it is a simple, energy efficient option wherever a dimmer is not needed.

Choose Your Finish

The Puck only comes in a single opal finish, so there is no finish choice here. The real decision is between this non-dimmable 2W version and the dimmable 5W Punch Bulb Puck, depending on the type of switch your fitting has.

How It Works

This is the non-dimmable 2W LED version, built for standard on and off switches rather than a dimmer circuit. It runs on a 100 to 240V AC supply, gives out 210 lumens with a CRI of 83, at a warm 2700K colour temperature, and is rated for around 35,000 hours, using around a fiftieth of the energy of a traditional bulb for the light it gives out.

Where It Works Best

Fit it into any standard E27 screw fitting, though it was designed to pair with the Hooked and Caged ranges in particular. If your fitting is wired to a dimmer switch, choose the Dimmable Punch Bulb Puck instead. This non-dimmable version paired with a dimmer will simply run at full brightness with no dimming effect, and may flicker or buzz.

Made By Buster + Punch

Before starting Buster + Punch in 2013, Massimo Buster Minale worked as an architect while building motorbikes for himself in a garage in Shoreditch. That same instinct, taking something ordinary and giving it real attention, is why even a simple, non-dimmable puck shaped bulb gets finished as carefully as the rest of the range.

Good To Know

• Dimensions: 96mm height, 58mm width
• Fitting: E27 screw
• Wattage: 2W LED
• Supply: 100 to 240V AC
• Light output: 210 lumens, CRI 83, colour temperature 2700K
• Lifespan: around 35,000 hours
• Material: robust polycarbonate shell
• Dimmable: no, for use with on and off switches only
• Shell: opal finish
• Suits: Hooked and Caged light fittings in particular
• Care: wipe with a dry, lint free cloth, no chemicals. All finishes are prone to aging over time
• Warranty: two year Buster + Punch manufacturer's warranty as standard

Questions People Ask

Is this bulb dimmable?
No, this is the non-dimmable version, made for standard on and off switches only.

What is the difference between this and the dimmable Punch Puck Bulb?
This version is 2W and only suited to standard on and off switches, while the dimmable version is 5W and needs an LED compatible dimmer switch.

Can I fit this on a dimmer switch?
No, a non-dimmable bulb on a dimmer circuit can cause flickering or buzzing. Choose the Dimmable Punch Bulb Puck for dimmer circuits instead.

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.