Buster + Punch Dummy Dimmer Module Intermediate Push On Off Switch 3 Way

One Knob, Switched From Three Places

Landings and long hallways often need a light controlled from more than two points, which is where an intermediate switch comes in. This module looks exactly like a Buster + Punch dimmer knob but works as a three way intermediate on/off switch instead, keeping the hardware consistent even where dimming isn't the point.

Choose Your Finish

This is a behind the plate component with no finish of its own. It's built to sit under whichever Buster + Punch detail kit, knob and coin screws, you've chosen elsewhere on the same plate, so every switch on a run reads as a matching set regardless of function.

How It Works

Inside, it's a straightforward push on/off mechanism wired for intermediate three way switching, rated at 230V AC, 50Hz, with a maximum load and current rating of 6A. There's no dimming circuitry, so it simply passes a circuit's on and off state along, letting that circuit be switched from a third location alongside two standard two way switches.

Where It Works Best

Use this where a single light needs switching from three or more points, a long hallway with switches at each end and partway along, or a staircase with a landing switch in between. Where only two switching points are needed, the standard two way dummy dimmer module is the simpler fit.

Made By Buster + Punch

Buster + Punch's modular system exists precisely so a specialist part like this can slot in wherever it's needed without disrupting the rest of a plate's appearance. Founder Massimo Buster Minale set the company up in 2013 on the back of years spent modifying motorbikes in a Shoreditch garage, where swapping in exactly the right part mattered more than settling for whatever was already fitted, and that thinking still shapes even a small intermediate module like this one.

Good To Know

• Module size: 23 x 50mm, 24mm depth plus 32mm terminal projection
• Switching: intermediate three way push on/off, no dimming function
• Electrical rating: 230V AC, 50Hz, 6A maximum load and current
• Terminal capacity: 3.2mm diameter, 3 x 1.5mm² conductors
• Compatible with Buster + Punch detail kits only, not third party dimmer modules
• In the box: one intermediate dummy dimmer module, one anti rotation adapter
• For indoor, dry domestic lighting circuits only
• Care: wipe with a dry, lint free cloth, no chemical cleaners
• Warranty: two year Buster + Punch manufacturer's warranty as standard

Questions People Ask

Does this module dim the light?
No, it has no dimming function. It works purely as an intermediate on/off switch, allowing a light to be controlled from a third switching point.

How is this different from the standard two way dummy dimmer module?
The two way version suits a light switched from two locations. This intermediate version adds a third switching point to the same circuit.

Can I fit this with a Buster + Punch detail kit from another finish family?
Yes, any Buster + Punch detail kit is compatible; third party dimmer modules and detail kits are not.

2.30 Min Width (cm) X 5.00 Min Height (cm) X 2.40 Internal Depth (cm) X 3.20X External Depth (cm)

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.