Buster + Punch 4G 2-Way Toggle Switch - Brass Back Plate & Brass Cross Knurl

Four Circuits, Solid Brass Throughout

This 4G toggle switch is machined entirely in brass, plate and all four toggles, finished with Buster + Punch's diamond-cut cross knurl on each one. It's built for a wall position where several circuits need to be grouped together, with a single warm metal surface rather than four separate switches.

Choose Your Finish

There's no finish option to choose on this listing. Plate, toggles and collars are all solid brass, so the whole plate reads as one continuous metal surface, and it will darken and gain character with handling over the years.

How It Works

Each of the four toggle modules behind the plate is wired as 2-way and rated at 10A, and each switches its own circuit independently of the other three, so one plate can control four separate lighting circuits from a single wall position. As with all hardwired Buster + Punch electrics, installation should always be carried out by a qualified electrician.

Where It Works Best

Suits a period hallway or an entrance to an open plan kitchen and living space, anywhere four separate circuits, hall lights, kitchen zones, an outside light, converge at one wall. Brass tends to read best here against wood panelling, dark paint or a traditional hallway.

Made By Buster + Punch

By the time he set up Buster + Punch in 2013, Massimo Buster Minale had already spent years training as an architect and building motorbikes from raw metal in a Shoreditch garage. That same unwillingness to plate a cheap material over a good finish carries through to this plate, machined in solid brass across all four toggles rather than dressed up with a thin coating.

Good to Know

• Plate size: 14.4 x 8.8cm, 4 gang
• Plate material: solid brass throughout
• Weight: 0.35kg
• Knurl: cross (diamond-cut), Buster + Punch's original pattern
• Switching: 4 x 2-way toggle modules, each independently switched, 10A rated
• Finish: brass plate, toggles and collars, one option only on this listing
• Supplied as separate components (plate, toggle modules, detail kit and fixings) for assembly during installation
• Rated for dry indoor locations only
• Care: wipe with a dry, lint free cloth, no chemical cleaners. Brass will age and darken with handling, which is normal and part of the finish
• Warranty: two year Buster + Punch manufacturer's warranty as standard

Questions People Ask

Can each of the four toggles control a separate circuit?
Yes. Each toggle module is wired independently, so this plate can control four completely separate lighting circuits from a single wall position.

Will the four toggles age at different rates depending on how often they're used?
They might develop very slightly different patina if one is used far more often than the others, since handling is what darkens and polishes brass. This is normal and part of how a solid brass finish matures.

Do I need a qualified electrician to fit this?
Yes. This is a hardwired fitting connected to your mains lighting circuits, and it should always be installed by a qualified electrician.

Length: 14.4 cm
Width: 4.7 cm
Height: 8.8 cm
Internal Depth: 2.3 cm
External Depth: 2.4 cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.