Buster + Punch 2G 120W Dimmer Switch - Brass Back Plate & Brass Linear Knurl

A Solid Brass Dimmer for Two Lighting Circuits

This two gang dimmer from Buster + Punch comes in a single, solid brass finish, plate and knobs both machined in brass with the new Linear Knurl pattern. Two independent dimmer circuits, one warm, consistent finish throughout.

Choose Your Finish

There's no accent choice on this one, it's brass through and through, plate, knobs and collars all matching. If you'd rather have a different plate colour with a brass, steel or matching accent knob, the other finishes in this Linear Knurl collection cover that ground.

How It Works

Each of the two rotary knobs runs its own dimmer circuit, with electronic soft start and two way switching so you get proper on and off alongside dimming. Between them they'll handle LED bulbs from 5W to 120W or incandescent and halogen bulbs from 60W to 400W, on a 230 to 240V, 50Hz supply.

Where It Works Best

Suits any room with two circuits to control from one plate, a living room with a pendant and wall lights, or a bedroom with ceiling and bedside circuits. If your room only needs one dimmer, or your circuit count runs higher, the same Linear Knurl finish is available across the rest of the Buster + Punch switch range.

Made By Buster + Punch

Buster + Punch began in 2013 when Massimo Buster Minale, an architect who'd worked at practices including Foster and Partners, started machining motorbike parts by hand in a Shoreditch garage. That same approach carried over into switches like this one, solid brass rather than plated or stamped metal. The Linear Knurl pattern seen here is the newer sibling to the brand's original diamond cut Cross Knurl.

Good To Know

• Plate size: 88 x 88mm, 2 gang
• Plate and knobs: solid machined brass, Linear Knurl detail
• Switching: two independent rotary dimmer modules, electronic soft start, two way switching
• Electrical rating: 230 to 240V, 50Hz
• Dimming range: LED 5W to 120W or incandescent/halogen 60W to 400W, per circuit
• Finish: solid brass only on this listing, other plate and knob combinations available across the range
• In the box: brass back plate and dimmer module hardware, plus the brass knurl knob detail kit, delivered separately for self assembly
• Rated for dry indoor locations only
• Care: wipe with a dry, lint free cloth, no chemical cleaners. Natural brass ages with handling over time
• Warranty: two year Buster + Punch manufacturer's warranty as standard

Questions People Ask

Will the brass finish change colour over time?
Yes, it's a natural metal finish so it will develop a patina with handling, which is part of the character of solid brass rather than a fault.

Can this dim any LED bulb I put in?
Only bulbs marked as dimmable will work properly. Fitting non dimmable LEDs can cause flickering or buzzing, covered in our complete guide to why lights flicker.

Are the two dimmer knobs on separate circuits?
Yes, each knob controls its own circuit independently, so you can dim or switch one without affecting the other.

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.