Hunza Pure LED Tier Light Wall Mount Retro - Powder Coat - Mains

Mains Powered, Plug In and Done

The Hunza Pure LED Tier Light Wall Mount Retro is the mains version of the wall mounted Tier Light, so there is no remote driver to hide or wire. It sends light through 360 degrees on a horizontal plane without projecting vertical light, which suits porches, entranceways and other sheltered spots. The Cree LED chip is built into the fitting and its parts can be serviced.

Your Pick of Seven Powder Coat Colours

Each fitting is powder coated aluminium, with colour baked onto the surface. The range is Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star. Colours shown are for indication only and swatches are available on request. Matt Black and Matt Bronze may be returned within 14 days of delivery when unused, uninstalled and in their original packaging. The other five colours, Olive Green, White, White Birch, Dark Grey and Silver Star, are made to order and non returnable unless faulty or damaged.

How It Works

• A Cree LED chip delivers 340 lumens at 700mA from 4 watts, with a CRI of 90 or more at 3000K.
• Colour temperature options are 2200K, 2700K, 3000K and 4000K.
• Mains powered with no driver required, and wired in parallel.
• Not dimmable.
• The hood measures 260mm across, the body is 155mm long, and the base is 78mm in diameter and 55mm deep, with 1m of cable supplied.
• Rated IP66 with a 5 year warranty.

Where It Works Best

• By a porch or back door, to light the threshold without glare
• On the side of a house or outbuilding along a path
• Beside a patio door where a low voltage cable run would be awkward

Planning and Installing With Moonlight Design

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. Our Design Service page shows photographs of our own completed schemes and explains how we plan, draw up and install them with NICEIC registered electricians. If you would like a scheme drawn up for your home, start there.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• This mains version cannot be dimmed.
• The LED is integrated, with serviceable parts.
• Powder coat colours are indicative and swatches are available on request.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Does this one need a driver?
No. It is a mains fitting and does not need a separate driver.

Can I use it with a dimmer?
No. The mains Retro version is not dimmable.

How much light does it give?
340 lumens at 700mA from 4 watts, spread through 360 degrees on a horizontal plane.

Can I send back a Matt White one?
Only if it is faulty or damaged. Matt White is made to order and non returnable otherwise.

Body
Length: 155mm

Hood
Diameter: 260mm

Base
Diameter: 78mm
Depth: 55mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Tier Lite Wall Mount Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.