Fabula Kingsley Magnetic Base LED Wall Lamp - 15/19cm Horizontal Hexagonal - Right Offset - Coffee & Acrylic Frosted Diffuser

A Hexagonal Wall Light Set Slightly Off Centre

This piece takes the Kingsley wall light concept and gives it a more angular shape, a horizontal hexagon in a coffee finish with a frosted acrylic diffuser, positioned with a right offset so it sits with intentional asymmetry rather than dead centre. An integrated LED module and magnetic base sit behind the plate, so the visible part can be lifted off and swapped later.

Choosing Your Finish

The coffee finish here gives a warm, understated brown tone that won't compete with a busy wall. Since the plate is magnetic, other finishes from across the Kingsley range can be fitted to the same base if you decide you want a change further down the line.

How It Works

Behind the diffuser sits a single 12W integrated LED, putting out roughly 498 lumens with a 120 degree spread and a warm 3000K tone. It's not dimmable, and the fitting is wired to Class I standards, so an earth connection is needed during installation. Its IP20 rating means it's designed purely for dry indoor spaces.

Where It Works Best

It works well in hallways, living rooms, bedrooms, kitchens and dining rooms, particularly as an accent alongside your main lighting rather than the sole light source in a room. Because it's only IP20 rated, it isn't intended for bathrooms or anywhere that could get wet.

Design Details

The Kingsley range uses a two part system, a fixed base handling the electrics and a magnetic decorative plate on top, here shaped into a horizontal hexagon rather than a simple round or square. The angular outline gives it a slightly more graphic, modern feel compared with the softer round options in the same range, while keeping the same aluminium, acrylic and iron construction.

Good to Know

• Built in 12W LED module, integrated and sealed rather than a replaceable bulb
• Not dimmable
• Class I electrical rating, requires an earth connection
• IP20 rated, for dry indoor areas only
• Colour temperature 3000K, CRI over 80, beam angle 120 degrees
• Made from aluminium, acrylic, iron and magnet fixings
• Height 19cm, width 21.5cm, projection 6.5cm
• Weighs 0.8kg
• 1 year warranty
• Unfortunately we're unable to deliver this item to Northern Ireland, the Scottish Highlands, the Isle of Wight, Jersey or Guernsey

Questions People Ask

Is the light output adjustable?
The fitting isn't dimmable, so it runs at a fixed brightness of around 498 lumens.

Can I fit this myself?
It's wired to Class I standards and needs an earth connection, so we'd recommend having a qualified electrician install it.

Will this work in a bathroom?
No, its IP20 rating means it's meant for dry rooms only, not bathrooms or humid spaces.

Height: 19cm
Width: 21.5cm
Projection: 6.5cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.