Fabula Kingsley Magnetic Base LED Wall Lamp - 15/19cm Diamond - Bottom Offset - Sand White & Acrylic Frosted Diffuser

A Light That Moves Where You Point It

Kingsley builds its LED directly into a magnetic backplate, so the diamond shaped head can be slid and rotated to send light exactly where it's needed. This particular version comes in a 15 by 19cm size with a bottom offset layout, finished in sand white with a frosted acrylic diffuser that spreads a soft, even glow rather than a sharp beam.

Choosing Your Finish

This piece is finished in a muted sand white with a frosted acrylic diffuser, giving it a quiet, unobtrusive look on the wall. The Kingsley design is produced in more than one size and offset layout, so if this particular proportion isn't quite right, another version within the design may suit better.

How It Works

A 12W LED is built into the fitting, producing around 498 lumens at a warm 3000K colour temperature across a 120 degree beam angle, with a colour rendering index above 80 for reasonably natural colour rendering. Because the LED is integrated, there's no bulb to buy or swap out later. It isn't dimmable, and is wired to Class I standards, so it needs an earth connection at installation. Its IP20 rating means it's built for dry indoor rooms rather than bathrooms.

Where It Works Best

Given its IP20 rating, this fitting belongs in dry indoor spaces rather than a bathroom. It works well in a living room, kitchen, bedroom, dining room or hallway, and its adjustable head makes it a useful accent or reading light wherever you want to redirect the beam without moving the fitting itself.

Design Details

Made from a combination of aluminium, acrylic, iron and magnet, the Kingsley design lets the diamond shaped head sit on a magnetic plate rather than a fixed arm, so the angle can be adjusted by hand whenever needed. The frosted acrylic diffuser spreads the LED's output evenly across the diamond face, keeping the light gentle rather than concentrated in one spot.

Good to Know

• Built in 12W integrated LED, no separate bulb needed
• Outputs around 498 lumens at 3000K colour temperature
• 120 degree beam angle, CRI above 80
• Not dimmable
• Class I electrical rating, requires an earth connection
• IP20 rated, suitable for dry indoor areas only
• Made from aluminium, acrylic, iron and magnet
• Height 26cm, width 26cm, projection 6.5cm
• Weighs 0.9kg
• 1 year warranty
• Unfortunately we're unable to deliver this item to Northern Ireland, the Scottish Highlands, the Isle of Wight, Jersey or Guernsey

Questions People Ask

Will I need to buy a bulb for this?
No, the LED is integrated into the fitting, so there's nothing separate to buy or replace.

Is this dimmable?
No, this fitting isn't dimmable.

Can this go in a bathroom?
No, it's IP20 rated, so it's intended for dry indoor rooms rather than bathrooms.

Height: 26cm
Width: 26cm
Projection: 6.5cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.