Collingwood 265mm Bracket for High Bay Luminaires

An Angled Mount for High Bay Fittings

Some installations need a high bay light angled rather than hanging straight down from the trunking or ceiling point above it. This bracket makes that possible. A pivot joint holds a locking screw, so once you have swung the fitting round to the angle you want, you tighten the screw and it stays put.

A Simple, Purpose Built Fixing

The bracket is finished in matt black to match Collingwood's high bay range, so it disappears into the fitting rather than standing out underneath it. It bolts straight onto the standard high bay fixing points, with no drilling or adapting needed, and comes with its own fixing hardware.

How It Works

• Fits between the high bay luminaire and its mounting point, in place of a straight hanging bracket.
• A pivot joint lets you angle the fitting, then a locking screw holds that angle in place.
• Measures 265.6mm in height, 133mm in length and 42mm in depth.
• Bolts directly onto the standard fixing points on Collingwood high bay luminaires.

Where It Works Best

Reach for this bracket wherever a high bay fitting cannot simply hang straight down, a mezzanine edge, a sloped roof void, or an aisle that needs light thrown at an angle rather than straight underneath the fitting. It is built for warehouses, workshops, distribution sheds and factory floors, anywhere high bay luminaires are mounted well above head height and need adjusting to aim the light where it is actually needed.

Collingwood Lighting

Collingwood Lighting designs and manufactures its LED products from Sywell in Northamptonshire, and has specialised in LED technology since 2002. Its high bay luminaires, and the brackets and accessories that go with them, are part of that same range. Collingwood has also been awarded a Gold medal by EcoVadis, placing it among the top five percent of companies assessed globally for sustainability.

Good to Know

• Carries a 1 year warranty from Collingwood.
• Designed to fit the standard fixing points on Collingwood high bay luminaires, so check it matches your specific fitting before ordering.
• As this bracket is used to mount high bay luminaires at height, Moonlight Design recommends the installation is carried out by a registered NICEIC electrician.

Questions People Ask

• Does this bracket let me angle a high bay light instead of hanging it straight down? Yes, the pivot joint lets you set the fitting at an angle, then a locking screw holds that position in place.
• What are the dimensions of the bracket? It measures 265.6mm in height, 133mm in length and 42mm in depth.
• Does it fit any high bay luminaire? It is designed to bolt onto the standard fixing points used on Collingwood's high bay range, so check it matches your specific fitting before ordering.
• What warranty does it come with? It carries a 1 year warranty.

265.6mm height x 133mm length x 42mm depth

• Collingwood High and Low Bay Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.