Buster + Punch 4G 2-Way Toggle Switch - Smoked Bronze Back Plate & Cross Knurl

Four Toggles in a Darker, Smoked Finish

This 4G toggle switch pairs a smoked bronze back plate with Buster + Punch's diamond-cut cross knurl on each of its four toggles. The finish is deliberately mottled rather than flat, and the plate groups four independent circuits together at one wall position instead of spreading four separate switches around a room.

Choose Your Finish

The smoked bronze plate is fixed. Match all four toggles in Smoked Bronze for one dark, tonal surface, or choose Brass or Steel collars to lift the plate with a run of contrasting metal.

How It Works

Each toggle module is wired as 2-way and rated at 10A, and switches its own circuit independently of the other three, so this single plate can control four separate lighting circuits from one wall position. As with all hardwired Buster + Punch electrics, installation should always be carried out by a qualified electrician.

Where It Works Best

Well suited to a large, darker living space or a period hallway where several circuits, pendant lights, wall lights, an outside light, accent lighting, meet at one wall. The mottled finish tends to disappear into a dimly lit room rather than standing out under bright light.

Made By Buster + Punch

Smoking and ageing metal by hand is a technique Buster + Punch carried over from its earliest days, when founder Massimo Buster Minale was finishing motorbike parts by hand in a Shoreditch garage rather than running a switch plate business. Spread across four toggles on one plate, that same hand finishing means some natural variation between them, which is intended rather than a flaw.

Good to Know

• Plate size: 14.4 x 8.8cm, 4 gang
• Plate material: solid stainless steel, smoked bronze finish
• Weight: 0.33kg
• Knurl: cross (diamond-cut), Buster + Punch's original pattern
• Switching: 4 x 2-way toggle modules, each independently switched, 10A rated
• Finish options: Smoked Bronze, Brass or Steel toggles and collars, plate stays smoked bronze throughout
• Supplied as separate components (plate, toggle modules, detail kit and fixings) for assembly during installation
• Rated for dry indoor locations only
• Care: wipe with a dry, lint free cloth, no chemical cleaners. The smoked finish will continue to age and vary slightly with handling
• Warranty: two year Buster + Punch manufacturer's warranty as standard

Questions People Ask

Will the four toggles look slightly different from each other?
Some variation is expected. The smoked finish is applied for a mottled, aged look, so the four toggles won't read as perfectly uniform, and this is part of the finish rather than a fault.

Can each toggle be wired to a different circuit?
Yes. Each of the four toggle modules is wired independently, so this one plate can control four separate lighting circuits.

Do I need an electrician to install this?
Yes. This is a hardwired fitting connected to your mains lighting circuits, and it should always be installed by a qualified electrician.

Length: 14.4 cm
Width: 4.7 cm
Height: 8.8 cm
Internal Depth: 2.3 cm
External Depth: 2.4 cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.