Solid copper, low voltage louvred step light that recesses flush into a step or wall face and washes the tread with an even horizontal spread of light.
Hunza Step Light Louvre - Copper - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 Years Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A step light that washes the whole tread, not a single spot
The Hunza Step Light Louvre is a small, round fitting that recesses flush into the face of a step, wall or riser. Instead of an open lens throwing a single beam, the face is cut with five horizontal slats. Light escapes sideways through those slats and spreads into a wide, even band across the tread below, rather than one bright patch in the middle.
This is the low voltage version, run from a transformer with a small MR16 lamp sitting behind the louvre.
Solid copper, left to age naturally
This version is made from solid natural copper, not a plated finish over another metal. We checked Hunza's own studio photography before writing this, and the whole visible face, including the louvre itself, is one piece of copper.
- Copper is a natural, uncoated finish, so it will develop a patina over time rather than staying bright and polished.
- How quickly it changes colour depends on local air, rainfall and how sheltered the position is.
- Hunza notes that finish colours on screen are a guide only, so ask us for a physical swatch if you're matching several fittings.
How It Works
- Recessed body 63.5mm diameter, 70mm length, into a 63.5mm cut out.
- Flange 88mm diameter and only 4mm deep, so it sits close to flush with the surrounding surface.
- Supplied with 1m of cable, wired in parallel.
- Runs on low voltage from a Hunza transformer (sold separately), with a Hunza approved MR16 LED lamp (also sold separately) behind the louvre.
- The louvre is fixed in the flange, so the horizontal spread is set by the slats rather than something you aim on site.
- Rated IP66, with a 10 year warranty.
- The same design is also available as a GU10 mains version that skips the transformer, and as a Pure LED version with an integrated chip instead of a replaceable lamp.
Where It Works Best
- Steps and staircases, especially runs where every tread needs even light rather than isolated pools.
- Low garden walls and retaining walls either side of a flight of steps.
- Marking a change of level safely, such as where a patio steps down to a lawn.
- Anywhere a plain downlight would leave part of the tread dark or glare into someone's eyes, since the louvre keeps the lamp itself hidden from view.
Our own installations
The in situ photographs on this page are Moonlight Design's own designs and installations, not stock imagery. They show stone staircases and garden steps we have actually lit, including a run of steps up to a garden pavilion and a wide symmetrical staircase leading up to a house, both washed evenly along each tread. None of these particular photos show a fitting close enough to confirm which finish is pictured, so treat them as a guide to how the light behaves on a real staircase rather than a colour reference.
Good to Know
- Usually ships within 2 to 3 days. If it's out of stock, please allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- No bulb is supplied. Use a Hunza approved MR16 LED lamp to keep the IP rating and warranty valid.
- You will also need a compatible transformer, sold separately.
- Strictly for outdoor use.
- We always recommend having outdoor lighting installed by a registered NICEIC electrician.
Questions People Ask
What does the louvre design do that a plain eyelid or solid hood step light doesn't?
An eyelid or hood shields the lamp from one side and throws light more in a single direction. The louvre's five horizontal slats spread light sideways across the whole width of the fitting, giving a more even wash along the tread instead of one bright patch.
Can I adjust the direction of the light?
No. The louvre is fixed into the flange, so the spread is set by the slats rather than something you can aim on site.
Does this fitting come with a bulb?
No. It needs a Hunza approved MR16 LED lamp, bought separately, to keep the IP rating and warranty valid.
Will the copper change colour after it's installed?
Yes. Solid copper is a natural finish and Hunza expects it to weather and patina outdoors rather than stay bright.
Is there a mains version of this fitting?
Yes. The same design is available as a GU10 mains version that doesn't need a transformer, as well as a Pure LED version with an integrated LED chip.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
