Outdoor Lights

Outdoor Lights

Outdoor lights cover every fixture built to withstand UK weather, from wall mounted and lantern style fittings to freestanding lamp posts, bollards, ground lights and spike lights for borders and beds. Our range spans low voltage garden lighting systems run from a single transformer through to straight to mains fittings for permanent installations, with weatherproof housings suited to fully exposed, covered or even underwater locations. Specialist brands include Hunza and LuxR for hand assembled New Zealand engineering, Collingwood and SLV for LED downlights, floodlights and outdoor spotlighting, and Lumena for solar and mains powered bollards and spike lights. Norlys brings Scandinavian styled wall lanterns, while Moretti Luce and Bover add a more design led Italian and Spanish edge, from cast brass lanterns to hand woven outdoor pendants and floor lamps. Styles run from minimalist stainless steel and anthracite designs to traditional cast and painted lanterns, with LED, GU10 and colour changing RGBW options throughout. Popular applications include security and motion sensor lighting, garden and landscape lighting, and patio and deck lighting, giving you everything needed to light paths, driveways, entrances and outdoor living spaces from a single collection.

Filters

Sort by:

123 products

Collingwood GL100 ground light in antique brass, angled studio view of the domed cap and single facet windowCollingwood GL100 ground light in antique brass, close angle on the single facet light window
Collingwood GL100 mini LED ground light in antique brass, angled view of the low domed fitting showing the single visible light window recessed into the brushed brass surfaceAntique brass Collingwood GL100 ground light seen from a slightly different angle, showing the smooth domed top and the off centre light aperture with its dark toughened lens
Collingwood GL100 stainless steel ground light shown at an angle on a white background, with the Collingwood name and 316 grade marking etched into the domed housing beside the single light aperture.Close up of the Collingwood GL100's brushed stainless steel dome, showing the recessed light slot cut into one side of the housing.
Collingwood GL100 four facet mini ground light in stainless steel 316, viewed from above showing the brushed dome top and one of the four milled facet channels.Close up of the Collingwood GL100 ground light's stainless steel dome and facet channel, showing the dark rubber seal recessed into the housing.
Collingwood GL100 3 facet LED ground light in stainless steel, studio shot showing the brushed dome top and three recessed light aperturesTechnical line drawing of the Collingwood GL100 ground light showing 40mm diameter, 46mm installed depth and 1m flying lead
Collingwood GL100 mini LED ground light in antique brass, angled view showing the domed housing with two of its three angled facet openings and dark lensed light windows.Collingwood GL100 antique brass ground light, close angled view of the flush domed brass housing and facet cutouts that spread light sideways across the ground.
Collingwood GL100 mini LED ground light in stainless steel 316, studio shot of the domed cap showing the two angled facet cutouts and etched Collingwood 316 markingsCollingwood GL100 mini LED ground light in stainless steel 316, close view of the domed cap showing the side retaining clip and etched 316 marking on the body
Collingwood SL220 low voltage spike light on a plain white studio background, angled view with the matte bronze anodised cylindrical head tilted to one side, a slim amber bezel ring around the clear faceted reflector lens, and the narrow bronze stem running down towards the ground spike.Technical line drawing of the Collingwood SL220 spike light in side view, dimensioned with a 62.5mm diameter head, 440mm overall height and a 240mm spike section, alongside a boxed note reading 3m flying lead.
Collingwood SL220 spike light in brushed stainless steel, studio shot on a plain white background. The cylindrical head is tilted forward on its polished knuckle, the clear faceted lens catching the light, with the slim spike stem running down and out of the bottom of the frame.Brushed stainless steel SL220 garden spike light against a plain white studio background, angled head shown close in so the satin grain of the cylinder, the stepped bezel and the recessed lens are all visible.
Close studio shot of the Collingwood SL220 spike light head on a plain white background, a short black cylinder tilted to the right with a clear faceted lens and reflector visible in the front opening, and the top of the black stem below it.Full length studio shot of the Collingwood SL220 spike light on a plain white background, showing the black cylindrical head angled upward on a long slim ground spike that tapers to a point.
Collingwood SL220 copper LED spike light, close up studio shot of the tilted head showing the round lens and brushed copper barrel.Collingwood SL220 copper LED spike light, close up studio shot of the tilted head and lens, alternate angle view.
Collingwood UL030 SPS spotlight in brass, angled studio shot on a white background showing the square four hole base plate, the adjustable stainless steel yoke with brass locking bolt, and the clear front lens over the built in LED.Technical line drawing of the Collingwood UL030 SPS spotlight showing a 60mm head diameter, 90mm overall height, a 65mm by 65mm base plate, and the 3 metre flying lead.
Collingwood UL030 SPS stainless steel garden spotlight on a white studio background, showing the ribbed heat sink barrel, round lens face and adjustable swivel bracket bolted to a square drilled base plate.Technical dimension drawing of the Collingwood UL030 SPS spotlight, showing a 60mm diameter head, 90mm overall height, a 65mm square fixing base plate and the 3m flying lead.
Collingwood UL030 SPS black spotlight, angled studio shot showing the illuminated LED lens, 360 degree stainless steel swivel bracket and square fixing base plate.Technical line drawing of the Collingwood UL030 SPS spotlight showing a 90mm body height, 60mm head diameter, 65mm by 65mm fixing base and 3 metre flying lead.
Collingwood Fountain 25W submersible water feature light seen from an angle, showing the brushed stainless steel rim and the ring of LEDs behind the glass lens around the central threaded fittingUnderside of the Collingwood Fountain 25W water feature light showing the cable gland, exit cable and threaded rear housing

Designs from the Outdoor Lighting Experts

Outdoor lighting is both our specialism and our passion here at Moonlight Design. Using our expertise and creative vision, we have curated an extensive selection of both traditional and modern outdoor lighting styles for you to choose from, allowing you to create your ideal outdoor space. Whether you’re seeking traditional lantern styles in bronze and brass finishes or something sleek and contemporary in chrome and glass, our latest outdoor lighting range has something to suit every taste and every aesthetic. And with an extensive selection of LED lighting options to choose from, you can ensure your outside lighting is both powerful and energy-efficient while remaining robust enough to withstand weather and temperature changes.

Outside Lighting for All Applications

Our collection includes lighting designs for all outdoor applications, allowing you to illuminate any and all of your outdoor spaces to your precise requirements. From security lights to keep your premises safe and secure, to subtle deck lights for adding ambience to your seating areas and decorative garden lights to illuminate your green spaces, there’s a light for every need here at Moonlight Design.

We're Proud To Offer