{"product_id":"leverint-temple-small-pillar-light","title":"Leverint Temple Small Pillar Light","description":"\u003ch3\u003eA Slim Column of Ribbed Glass for the Wall\u003c\/h3\u003e\n\u003cp\u003eThe Temple Pillar Light Small is a narrow wall light built around a vertical column of ribbed hand blown glass, held to the wall by two round fixings. It stands \u003cstrong\u003e\u003cu\u003e480mm tall\u003c\/u\u003e\u003c\/strong\u003e and 100mm wide, projecting 60mm, which makes it the most compact of the four Temple Pillar sizes. The light comes from integrated LED strips rather than bulbs, and the ribs break it into soft vertical lines that glow along the wall. Leverint suggests it as a duo, so think of one on each side of a mirror, a bed or a doorway.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Finish\u003c\/h3\u003e\n\u003cp\u003eEach Temple Pillar Light is made to order in your choice of hand blown glass, plated metal finish and LED colour, chosen from the swatches and dropdowns above when you order. The glass comes in ribbed or fine ribbed, and Leverint plates the metalwork in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. The integrated LED strip is available in 2700K warm, 3000K warm white or 4000K natural white. Because the glass is blown by hand and the metal is plated by hand, \u003cstrong\u003e\u003cu\u003ethe colour and texture of your light may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.\u003c\/p\u003e\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eThis is a hardwired, mains powered fitting. Two LED linear COB strips sit behind the glass and run from one external driver, which Leverint says needs to be concealed within a cavity, so it is worth planning where the driver will go before the wall is finished. The fitting is mains dimmable, and Leverint recommends a TRIAC dimmer, leading edge only. We recommend that a qualified electrician installs it, ideally one who is NICEIC registered.\u003c\/p\u003e\n\u003ch3\u003eWhere It Works Best\u003c\/h3\u003e\n\u003cp\u003eLeverint points to contemporary bedrooms, hallways and bathrooms, and at 480mm tall the Small suits a bedside wall, a narrow hallway or either side of a bathroom mirror. Leverint rates the Temple Pillar Light IP44, so it is suitable for bathroom use. Our guide to \u003ca href=\"https:\/\/www.moonlightdesign.co.uk\/blogs\/blog\/what-are-bathroom-lighting-zones-a-guide-to-bathroom-lighting-regulations\" target=\"_blank\"\u003ebathroom lighting zones\u003c\/a\u003e explains where an IP44 fitting can go in a bathroom.\u003c\/p\u003e\n\u003ch3\u003eMade By Leverint\u003c\/h3\u003e\n\u003cp\u003eLeverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every light. Keeping the ribbed glass even along the whole length of a tall, narrow shape like this one is a good test of that skill.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandmade to order by Leverint in the UK; Leverint quotes approximately 4 to 6 weeks, so please check the current lead time before ordering\u003c\/li\u003e\n\u003cli\u003eAs a made to order light, it cannot be returned unless it arrives faulty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003e480mm tall x 100mm wide\u003c\/u\u003e\u003c\/strong\u003e, projecting 60mm from the wall; weighs approximately 3.1kg. Please check these measurements against your wall before ordering\u003c\/li\u003e\n\u003cli\u003eIntegrated LED, so there are no bulbs to buy; choose 2700K, 3000K or 4000K from the dropdown above\u003c\/li\u003e\n\u003cli\u003eRuns from one external driver, which must be concealed within a cavity\u003c\/li\u003e\n\u003cli\u003eMains dimmable with a TRIAC dimmer, leading edge only\u003c\/li\u003e\n\u003cli\u003eIP44 rated, CE and UKCA marked; 2 year warranty\u003c\/li\u003e\n\u003cli\u003eHand blown glass and hand plated metal, so \u003cstrong\u003e\u003cu\u003ecolour and texture may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the light\u003c\/li\u003e\n\u003cli\u003eWe recommend installation by a qualified electrician, ideally NICEIC registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions People Ask\u003c\/h3\u003e\n\u003ch4\u003eWhat glass, metal and LED colour can I choose?\u003c\/h4\u003e\n\u003cp\u003eThe glass comes in ribbed or fine ribbed. The metalwork can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel, and the integrated LED is available in 2700K warm, 3000K warm white or 4000K natural white. Pick your combination from the swatches and dropdowns on this page when you order.\u003c\/p\u003e\n\u003ch4\u003eDoes the Temple Pillar Light Small use bulbs, and can it be dimmed?\u003c\/h4\u003e\n\u003cp\u003eIt has integrated LED strips, so there are no bulbs to buy or replace. It is mains dimmable when used with a TRIAC dimmer, leading edge only, which is the type Leverint recommends.\u003c\/p\u003e\n\u003ch4\u003eDoes it need an electrician to fit it?\u003c\/h4\u003e\n\u003cp\u003eYes, we recommend that a qualified electrician installs it, ideally one who is NICEIC registered. It is a hardwired fitting with an external driver that has to be concealed within a cavity, so the wiring and the driver position should be planned and fitted properly.\u003c\/p\u003e\n\u003ch4\u003eCan I use the Temple Pillar Light in a bathroom?\u003c\/h4\u003e\n\u003cp\u003eLeverint rates it IP44, so it is suitable for bathroom use. Where exactly it can go depends on the bathroom lighting zones, and it should be installed by a qualified electrician.\u003c\/p\u003e\n\u003ch4\u003eHow big and heavy is the Temple Pillar Light Small?\u003c\/h4\u003e\n\u003cp\u003eIt measures 480mm tall by 100mm wide and projects 60mm from the wall. It weighs approximately 3.1kg.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take, and can I return it?\u003c\/h4\u003e\n\u003cp\u003eEach Temple Pillar Light is handmade to order by Leverint in the UK, with a lead time of approximately 4 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.\u003c\/p\u003e","brand":"Leverint Lighting","offers":[{"title":"Default Title","offer_id":55594633855303,"sku":"FM212","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/6515\/4375\/files\/leverint-temple-small-pillar-light-01-studio.jpg?v=1793118530","url":"https:\/\/www.moonlightdesign.co.uk\/products\/leverint-temple-small-pillar-light","provider":"Moonlight Design","version":"1.0","type":"link"}