{"product_id":"leverint-temple-medium-rod-pendant","title":"Leverint Temple Medium Rod Pendant","description":"\u003ch3\u003eA Long Bar of Ribbed Glass and Soft Light\u003c\/h3\u003e\n\u003cp\u003eThe Temple Rod Pendant Medium is a single hand blown glass bar, lit from within by an integrated LED strip and hung level from two slim rods. Leverint describes it as commanding, multi stream lighting at its most prestigious, and the length is what makes it so. \u003cstrong\u003e\u003cu\u003eThis is a large, heavy fitting: the Medium is 1000mm long and weighs approximately 6.65kg\u003c\/u\u003e\u003c\/strong\u003e, so please check it against your island, table or ceiling before you order. Hung low over a surface, it reads as one clean horizontal line of light rather than a cluster of separate lamps.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Finish\u003c\/h3\u003e\n\u003cp\u003eEach pendant is made to order in your choice of hand blown glass and plated metal finish, chosen from the swatches and dropdowns above on this page. The glass comes in ribbed or fine ribbed, and the photos show both, with the ribbed glass giving bolder lines along the length of the bar and the fine ribbed glass a much softer, more even look. Leverint plates the rods and ceiling fittings in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel, so you can match it to the rest of your scheme. You can also choose the colour of the light from the dropdown above: 2700K warm, 3000K warm white or 4000K natural white. Because the glass is blown by hand and the metal is plated by hand, \u003cstrong\u003e\u003cu\u003ethe colour and texture of your pendant may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.\u003c\/p\u003e\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eThe light source is an integrated LED linear strip, rated at 15W and 24V, inside the glass, so there is no bulb to buy or change. The strip runs from an external driver, which Leverint's technical sheet says is to be concealed within the ceiling cavity, and it can be dimmed from the wall with a mains dimmer pack, so the light can go from a bright working glow to a low evening one. Leverint asks customers to contact them for guidance on installing the driver. This is a hardwired ceiling fitting, and we recommend installation by a qualified electrician, ideally one who is NICEIC registered. The overall drop is made to specification, with up to 1000mm as standard, so it can be set to suit your ceiling height.\u003c\/p\u003e\n\u003ch3\u003eWhere It Works Best\u003c\/h3\u003e\n\u003cp\u003eAt 1000mm, the Medium is the shortest of the three Temple rod sizes, which makes it a good match for a smaller kitchen island, a round or square dining table, or a long console in a hallway. Hung centrally and low enough to feel part of the room, it gives even light along a work surface without a row of separate pendants. Leverint also makes the Temple Rod Pendant in Large at 1200mm and XL at 1500mm, if your table or island is longer.\u003c\/p\u003e\n\u003ch3\u003eMade By Leverint\u003c\/h3\u003e\n\u003cp\u003eLeverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every pendant. A glass bar a metre long with even ribs along its full length shows how much control that takes.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandmade to order by Leverint in the UK; Leverint quotes approximately 4 to 6 weeks, so please check the current lead time before ordering\u003c\/li\u003e\n\u003cli\u003eAs a made to order pendant, it cannot be returned unless it arrives faulty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eLarge fitting: 1000mm long x 100mm high, approximately 6.65kg\u003c\/u\u003e\u003c\/strong\u003e; please check these measurements against your space before ordering\u003c\/li\u003e\n\u003cli\u003eIntegrated 15W 24V LED linear strip in 2700K, 3000K or 4000K from the dropdown above; no bulb needed\u003c\/li\u003e\n\u003cli\u003eExternal LED driver, to be concealed within the ceiling cavity; mains dimmable using a 25W dimmer pack\u003c\/li\u003e\n\u003cli\u003eOverall drop made to specification, up to 1000mm as standard\u003c\/li\u003e\n\u003cli\u003eHand blown glass and hand plated metal, so \u003cstrong\u003e\u003cu\u003ecolour and texture may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCE and UKCA marked; 2 year warranty\u003c\/li\u003e\n\u003cli\u003ePolish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the pendant\u003c\/li\u003e\n\u003cli\u003eWe recommend installation by a qualified electrician, ideally NICEIC registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions People Ask\u003c\/h3\u003e\n\u003ch4\u003eHow long and how heavy is the Temple Rod Pendant Medium?\u003c\/h4\u003e\n\u003cp\u003eThe Medium is 1000mm long and 100mm high, and it weighs approximately 6.65kg. It hangs from two slim rods, and the overall drop is made to specification, with up to 1000mm as standard.\u003c\/p\u003e\n\u003ch4\u003eWhich glass and metal finishes can I choose?\u003c\/h4\u003e\n\u003cp\u003eThe glass comes in ribbed or fine ribbed, and the rods and ceiling fittings can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Pick your combination from the swatches and dropdowns on this page when you order.\u003c\/p\u003e\n\u003ch4\u003eWhat colour is the light?\u003c\/h4\u003e\n\u003cp\u003eYou can choose 2700K warm, 3000K warm white or 4000K natural white from the dropdown on this page. The lumen output is listed by Leverint as 1350 to 1800 per metre.\u003c\/p\u003e\n\u003ch4\u003eIs the Temple Rod Pendant dimmable, and does it need a driver?\u003c\/h4\u003e\n\u003cp\u003eYes. It runs from an external 24V driver that is concealed within the ceiling cavity, and Leverint lists mains dimming through a 25W dimmer pack. Leverint asks customers to contact them for installation guidance on the driver.\u003c\/p\u003e\n\u003ch4\u003eCan I fit the Temple Rod Pendant myself?\u003c\/h4\u003e\n\u003cp\u003eIt is a hardwired ceiling fitting with an external driver, and we recommend installation by a qualified electrician, ideally one who is NICEIC registered.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take, and can I return it?\u003c\/h4\u003e\n\u003cp\u003eEach Temple Rod Pendant is handmade to order by Leverint in the UK, with a lead time of approximately 4 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.\u003c\/p\u003e","brand":"Leverint Lighting","offers":[{"title":"Default Title","offer_id":55594654007623,"sku":"RP213","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/6515\/4375\/files\/leverint-temple-medium-rod-pendant-ribbed.jpg?v=1793118721","url":"https:\/\/www.moonlightdesign.co.uk\/products\/leverint-temple-medium-rod-pendant","provider":"Moonlight Design","version":"1.0","type":"link"}