{"product_id":"leverint-temple-large-rod-pendant","title":"Leverint Temple Large Rod Pendant","description":"\u003ch3\u003eA Generous Line of Glass Over the Table\u003c\/h3\u003e\n\u003cp\u003eThe Temple Rod Pendant Large stretches the idea of the Temple to 1200mm: one hand blown glass bar, lit from within by an integrated LED strip and hung level from two slim rods. Leverint describes the range as commanding, multi stream lighting, and at this length it takes the place of a whole row of pendants. \u003cstrong\u003e\u003cu\u003eThis is a large, heavy fitting: the Large is 1200mm long and weighs approximately 6.65kg\u003c\/u\u003e\u003c\/strong\u003e, so please check it against your table, island and ceiling before you order. Hung low and centred, it gives one long, calm line of light.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Finish\u003c\/h3\u003e\n\u003cp\u003eEach pendant is made to order in your choice of hand blown glass and plated metal finish, chosen from the swatches and dropdowns above on this page. The glass comes in ribbed or fine ribbed, and the photos show both, with the ribbed glass giving clear lines along the bar and the fine ribbed glass a quieter, more even surface. The rods and ceiling fittings can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. The colour of the light is chosen from the dropdown above too: 2700K warm, 3000K warm white or 4000K natural white. Because the glass is blown by hand and the metal is plated by hand, \u003cstrong\u003e\u003cu\u003ethe colour and texture of your pendant may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.\u003c\/p\u003e\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eThere is no bulb to buy or change. The light comes from an integrated LED linear strip, rated at 15W and 24V, which runs from an external driver. Leverint's technical sheet says the driver is to be concealed within the ceiling cavity, and Leverint asks customers to contact them for guidance on installing it. The pendant can be dimmed from the wall through a mains dimmer pack, which lets the same fitting work for a bright breakfast and a low supper. This is a hardwired ceiling fitting, and we recommend installation by a qualified electrician, ideally one who is NICEIC registered. The overall drop is made to specification, with up to 1000mm as standard.\u003c\/p\u003e\n\u003ch3\u003eWhere It Works Best\u003c\/h3\u003e\n\u003cp\u003eThe Large suits a family dining table or a kitchen island of medium to generous size, where its 1200mm length can sit within the edges of the surface below. It also works over a long hallway console, a bar or a wide desk, anywhere that a single strong horizontal looks better than several small lights. If you need something shorter or longer, Leverint makes the same pendant in Medium at 1000mm and XL at 1500mm.\u003c\/p\u003e\n\u003ch3\u003eMade By Leverint\u003c\/h3\u003e\n\u003cp\u003eLeverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every pendant. Keeping the walls of a bar over a metre long even from end to end is a good example of the control involved.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandmade to order by Leverint in the UK; Leverint quotes approximately 4 to 6 weeks, so please check the current lead time before ordering\u003c\/li\u003e\n\u003cli\u003eAs a made to order pendant, it cannot be returned unless it arrives faulty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cu\u003eLarge fitting: 1200mm long x 100mm high, approximately 6.65kg\u003c\/u\u003e\u003c\/strong\u003e; please check these measurements against your space before ordering\u003c\/li\u003e\n\u003cli\u003eIntegrated 15W 24V LED linear strip in 2700K, 3000K or 4000K from the dropdown above; no bulb needed\u003c\/li\u003e\n\u003cli\u003eExternal LED driver, to be concealed within the ceiling cavity; mains dimmable using a 25W dimmer pack\u003c\/li\u003e\n\u003cli\u003eOverall drop made to specification, up to 1000mm as standard\u003c\/li\u003e\n\u003cli\u003eHand blown glass and hand plated metal, so \u003cstrong\u003e\u003cu\u003ecolour and texture may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCE and UKCA marked; 2 year warranty\u003c\/li\u003e\n\u003cli\u003ePolish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the pendant\u003c\/li\u003e\n\u003cli\u003eWe recommend installation by a qualified electrician, ideally NICEIC registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions People Ask\u003c\/h3\u003e\n\u003ch4\u003eHow long and how heavy is the Temple Rod Pendant Large?\u003c\/h4\u003e\n\u003cp\u003eThe Large is 1200mm long and 100mm high, and Leverint lists its weight as approximately 6.65kg. It hangs from two slim rods, and the overall drop is made to specification, with up to 1000mm as standard.\u003c\/p\u003e\n\u003ch4\u003eWhat glass and metal finishes can I choose?\u003c\/h4\u003e\n\u003cp\u003eThe glass comes in ribbed or fine ribbed, and the rods and ceiling fittings can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Choose from the swatches and dropdowns on this page when you order.\u003c\/p\u003e\n\u003ch4\u003eCan I choose a warmer or cooler light?\u003c\/h4\u003e\n\u003cp\u003eYes. The dropdown on this page offers 2700K warm, 3000K warm white and 4000K natural white. Leverint lists the lumen output as 1350 to 1800 per metre.\u003c\/p\u003e\n\u003ch4\u003eDoes the Temple Rod Pendant need a driver, and can it be dimmed?\u003c\/h4\u003e\n\u003cp\u003eYes to both. It runs from an external 24V driver concealed in the ceiling cavity, and Leverint lists mains dimming through a 25W dimmer pack. Leverint asks customers to contact them for installation guidance on the driver.\u003c\/p\u003e\n\u003ch4\u003eCan I fit the Temple Rod Pendant myself?\u003c\/h4\u003e\n\u003cp\u003eIt is a hardwired ceiling fitting with an external driver, and we recommend installation by a qualified electrician, ideally one who is NICEIC registered.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take, and can I return it?\u003c\/h4\u003e\n\u003cp\u003eEach Temple Rod Pendant is handmade to order by Leverint in the UK, with a lead time of approximately 4 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.\u003c\/p\u003e","brand":"Leverint Lighting","offers":[{"title":"Default Title","offer_id":55594658332999,"sku":"RP214","price":2195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/6515\/4375\/files\/leverint-temple-large-rod-pendant-ribbed.jpg?v=1793118782","url":"https:\/\/www.moonlightdesign.co.uk\/products\/leverint-temple-large-rod-pendant","provider":"Moonlight Design","version":"1.0","type":"link"}