{"product_id":"leverint-temple-flush-fitting","title":"Leverint Temple Flush Fitting","description":"\u003ch3\u003eA Low Glass Drum with a Sunburst of Ribs\u003c\/h3\u003e\n\u003cp\u003eThe Temple Flush Mount is a low, round fitting with a hand blown glass shade, \u003cstrong\u003e\u003cu\u003e200mm across and 100mm deep\u003c\/u\u003e\u003c\/strong\u003e, so it sits close to the surface rather than hanging down into the room. The ribs on the front fan out from a small round fixing at the centre, and two candle bulbs sit inside, glowing through the glass. Leverint lists it as both a wall light and a flush mount, designed for hallways, kitchens and other living areas.\u003c\/p\u003e\n\u003ch3\u003eChoose Your Finish\u003c\/h3\u003e\n\u003cp\u003eEach Temple Flush Mount is made to order in your choice of hand blown glass and plated metal finish, chosen from the swatches and dropdowns above when you order. The photos show it in ribbed, fine ribbed and transparent black glass, and Leverint also offers opaque white. The metalwork is plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel, so you can match the fitting to the rest of your scheme. Because the glass is blown by hand and the metal is plated by hand, \u003cstrong\u003e\u003cu\u003ethe colour and texture of your light may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.\u003c\/p\u003e\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\u003cp\u003eIt takes two E14 candle bulbs, which are not included as standard, but you can add Leverint's LED candle bulb from the dropdown above or choose no bulb and supply your own. Leverint lists a maximum of 8W LED and a supply of 220 to 240V, and the fitting is mains dimmable. It is a hardwired fitting, so we recommend that a qualified electrician installs it, ideally one who is NICEIC registered.\u003c\/p\u003e\n\u003cp\u003eLeverint confirms this light is rated IP44, so it is suitable for bathroom use. Our guide to \u003ca href=\"https:\/\/www.moonlightdesign.co.uk\/blogs\/blog\/what-are-bathroom-lighting-zones-a-guide-to-bathroom-lighting-regulations\" target=\"_blank\"\u003ebathroom lighting zones\u003c\/a\u003e explains what is allowed where.\u003c\/p\u003e\n\u003ch3\u003eWhere It Works Best\u003c\/h3\u003e\n\u003cp\u003eThe shallow 100mm depth makes it a good choice where a pendant would hang too low, such as a hallway, a kitchen or a living area. A pair looks neat either side of a round mirror, as in one of the photos, and a single fitting suits a landing or a narrow corridor where headroom matters.\u003c\/p\u003e\n\u003ch3\u003eMade By Leverint\u003c\/h3\u003e\n\u003cp\u003eLeverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every light. A drum with ribbing on both the face and the sides is a good example of the detail that hand blowing allows.\u003c\/p\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandmade to order by Leverint in the UK; Leverint quotes approximately 5 to 6 weeks, so please check the current lead time before ordering\u003c\/li\u003e\n\u003cli\u003eAs a made to order light, it cannot be returned unless it arrives faulty\u003c\/li\u003e\n\u003cli\u003e200mm diameter and 100mm deep; weighs approximately 1kg\u003c\/li\u003e\n\u003cli\u003eTakes 2 x E14 candle bulbs, 8W LED maximum; no bulb as standard, with Leverint's LED candle bulb available from the dropdown above\u003c\/li\u003e\n\u003cli\u003eRated IP44, so it is suitable for bathroom use\u003c\/li\u003e\n\u003cli\u003eMains dimmable when used with compatible dimmer and bulbs\u003c\/li\u003e\n\u003cli\u003eHand blown glass and hand plated metal, so \u003cstrong\u003e\u003cu\u003ecolour and texture may vary slightly from the photos\u003c\/u\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCE and UKCA marked; 2 year warranty\u003c\/li\u003e\n\u003cli\u003ePolish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the light\u003c\/li\u003e\n\u003cli\u003eWe recommend installation by a qualified electrician, ideally NICEIC registered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions People Ask\u003c\/h3\u003e\n\u003ch4\u003eWhat glass and metal finishes can I choose?\u003c\/h4\u003e\n\u003cp\u003eThe glass comes in ribbed, fine ribbed, transparent black or opaque white. The metalwork can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Pick your combination from the swatches on this page when you order.\u003c\/p\u003e\n\u003ch4\u003eDoes the Temple Flush Mount come with bulbs?\u003c\/h4\u003e\n\u003cp\u003eNot as standard. It takes two E14 candle bulbs, and you can add Leverint's LED candle bulb from the bulb dropdown when you order, or choose no bulb and fit your own LED candle bulbs, up to 8W LED as listed by Leverint.\u003c\/p\u003e\n\u003ch4\u003eIs the Temple Flush Mount dimmable?\u003c\/h4\u003e\n\u003cp\u003eYes, it is mains dimmable, provided it is used with a compatible dimmer switch and bulbs.\u003c\/p\u003e\n\u003ch4\u003eCan I use the Temple Flush Mount in a bathroom?\u003c\/h4\u003e\n\u003cp\u003eYes. Leverint confirms this light is rated IP44, so it is suitable for bathroom use. Please check our guide to bathroom lighting zones for where it can go, and have it installed by a qualified electrician.\u003c\/p\u003e\n\u003ch4\u003eShould an electrician install it?\u003c\/h4\u003e\n\u003cp\u003eYes, we recommend that a qualified electrician installs it, ideally one who is NICEIC registered, because it is a hardwired mains fitting.\u003c\/p\u003e\n\u003ch4\u003eHow big is the Temple Flush Mount?\u003c\/h4\u003e\n\u003cp\u003eThe glass drum measures 200mm in diameter and 100mm in depth, and the fitting weighs approximately 1kg.\u003c\/p\u003e\n\u003ch4\u003eHow long does it take, and can I return it?\u003c\/h4\u003e\n\u003cp\u003eEach Temple Flush Mount is handmade to order by Leverint in the UK, with a lead time of approximately 5 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.\u003c\/p\u003e","brand":"Leverint Lighting","offers":[{"title":"Default Title","offer_id":55594658136391,"sku":"SFM213","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/6515\/4375\/files\/leverint-temple-flush-mount-01-studio.jpg?v=1793118775","url":"https:\/\/www.moonlightdesign.co.uk\/products\/leverint-temple-flush-fitting","provider":"Moonlight Design","version":"1.0","type":"link"}