Moonlight Design Garden Lighting

The wireless PIR sensor can be programmed to trigger the whole garden or an individual Area for a pre-set time. Any number of PIRs can be installed together and will not over-ride the user’s control or each other i.e. if the lights have been switched on manually, a triggered PIR will not switch them off.
It is mains powered for zero maintenance but transmits wirelessly to the Lighting Control Modules, base-station and signal repeaters.
The PIR contains an adjustable ‘dusk’ sensor to prevent lighting triggers during the day. It is programmed wirelessly from the Remote Control (part number LS30050WRC), which is required for commissioning only.

Features

IP 55
Adjustable 1 – 15 minutes
1000meter Range
Does not over-ride user’s control
Adjustable sensitivity
Mains powered
‘Lid-On’ programming using Remote Control

Specification

Control - Timed trigger for whole-garden or a selected Area (scene), without over-riding circuits which have been manually switched on
Range - 1000 metre wireless range line-of-site
Adjustment - PIR sensitivity, On-time (1-15 mins), Dusk level
Module Size - 75 x 115 x 110mm
RF - 434.075MHz Narrow Band FM
Coding - Security channels 1–16 (learnt from Remote)
Power - 230VAC, <1W, 50Hz
CE Compliance - EN220-300, EN 50081 – 1, To EN 50082 – 1

Ref: LS30070PIR