The wireless Gate Interface & Signal Repeater can perform two separate functions;
1. Interfacing to electric gates or other sensor to provide automated lighting control when vehicles approach. When triggered, it wirelessly signals to the Lighting Control Modules an on-time of 1 to 15 minutes. It contains an adjustable dusk sensor to prevent trigger during daylight.
2. The signal repeater echo’s commands received from any of Light Symphony’s wireless transmitters. Up to 5 repeaters may be used together to extend Light Symphony’s range by 1000 meters* radius each.
Features
IP66 Tuff ABS enclosure
Isolated gate input
Adjustable on-time 1-15mins
Does not over-ride user’s control
1000M* range
Signal Booster (repeater)
Dusk sensor
How to Use It
The Gate-Interface provides a wide voltage, isolated input which can be connected to a variety of ‘triggers’ such as an electric gate controller or driveway light-beam detector. Using this interface, the lighting can automatically be switched on for a short time when, for example, a vehicle approaches.
Its on-time is adjustable from 1 to 15 minutes and it includes a dusk sensor to prevent unwanted triggers in daylight hours. It will not interfere with the user’s control, meaning that lights that have been switched on manually will not be affected.
Its1000 meter* signal-repeater extends Light Symphony’s wireless range as detailed below.
Signal Repeating
Uniquely, Light Symphony can be scaled to suit almost any sized project with the use of a few signal repeaters. Each signal repeater will add a 1000 meters* radius of extra coverage to a system. Up to 5 signal repeaters can be used together to achieve over a 5KM* range.
Each repeater will echo commands to all other repeaters on the system. This guarantees commands are reliably relayed over the entire site, wherever they originate from.
To achieve this and avoid interference, all repeaters are assigned a unique ID number from 1 to 5. For reliable operation, it is important to install repeaters so that adjacent numbered units are within good wireless range of each other, as shown below;
Specification
Input - Isolated 12-230VAC/DC Trigger, <20mA
Enclosure - IP66, UV stable, ABS plastic with non-penetrating wall-mounts - semi-clear lid & neoprene o-ring. Colour RAL7011
RF - Signal Repeater using 434.075MHz Narrow Band FM
Range - 1000 metre wireless range*. Note* stated range is line-of-site, obstacles will reduce this
Coding - Security channels 1–16
Power - Supply: 230VAC +/-10% 50Hz Standby <1W.
CE Compliance - EN 50081 – 1, To EN 50082 – 1
Ref: LS30800REP
Price:
£178.00
