Garden Zone Bronze 21 LED Round Mini Light GZ/Bronze21

Ref: GZ/Bronze21

It is not often that one can find products made to original styles and to original quality levels like in the old days. The Bronze family is a premium range of products that we believe achieves this, manufactured from heavy cast bronze (except models Bronze9 and Bronze20 which are produced from solid natural copper)* and chemically treated to give a natural looking Aged Bronze or Verdigris finish.

The Garden Zone Bronze 21 is an LED light which is suitable for walls to light paths or signs and lighting steps.

Using the 12V plug & go system and high power LED's makes this fitting energy efficient yet easy to use and install.

*Copper fittings use some brass components and all materials are without laquer to enable them to age naturally.

Material/Colour: Aged Bronze
Dimensions: h= 85mm p= 50mm
Voltage: 12v Plug & Go
Light Source: 1 x 1.6W High power LED
IP Rating IP44

Plug & Go

How it works

Step 1: Choose the areas you want to have lit then we suggest that you sketch a rough plan view of each area involved.

Step 2: Choose the fittings which will suit the requirements and list them out with the quantity of each where relevant. Be careful to bear in mind the voltage of the fittings chosen. All 240v fittings will need mains supply to wherever they are to be installed whereas all Plug & Go models just need to be connected into the low voltage cable (shown right).

Step 3: Measure the distance involved for the Plug & Go models chosen and determine, from the cable set options available which cable set or sets will be needed. Remember, up to 50 metres of cable can be used from 1 LED driver but the wattage loading must not exceed the recommended minimum, maximum.

Simple Plug & Go connections

Step 4: Plan where the mains supply will originate from. With the Plug & Go system you have a choice of placing the LED driver/drivers in an IP rated wall box on an exterior wall. However, depending on how large an area is involved, sometimes more than one mains feed may be needed in different locations. Consultation with an electrician is advisable on this matter.

Important

The Garden zone Plug & Go fittings use a unique single pin, 2 pole plug and as such are not compatible with any other product or system. Currently they are not dimmable but they will work when wired via a timer.

Maximum run is 80 metres from one driver.

All fittings must be plugged in BEFORE finally switching power on.