Light Symphony 2 Channel 2KW lighting controller

Ref: LS30500LCM

The Light Symphony Lighting Control Module provides 2 wirelessly controllable outputs each rated at 1000W and suitable for all load types. It provides flexible control for any lighting circuit or pump and is quickly configurable as a simple switch, group (zone) or scene controller, with 29 memories and a master on/off.

Output 1 can be programmed as a switched or dimmable output. Output 2 is switched only. The dimming mode provides a soft-on, soft-off feature with filament pre-heating, which can greatly increases lamp life.

The separately fused outputs are fully protected against over current and over temperature. Large 10mm² cable terminations, standard (20mm) gland cut-outs and an earth bonded gland-chassis simplify installation.

The built-in signal-strength indicator, zero-volt mains switching and power-on surge protection all enhance reliability. Lid-on programming speeds commissioning and reduces the risk of water ingress during installation.

How to use it

The Lighting Control Module (LCM) ‘hears’ the wireless commands from any of Light Symphony’s 1000meter controllers, such as the remote control or wireless wall-switch pictured above. The Garden On/Off button will switch all outputs together, providing a convenient master control. Each output can also be separately assigned to ‘Areas’ (1-29), to provide individual control.

An internal switch enables dimming (on output 1) and the soft on / soft off feature.

For larger systems, limitless LCM’s may be used together to create flexible lighting zones or scenes.

If a base-station is installed, it will also hear commands from the remote control or wall-switch and echo them. The Lighting Control Modules will ‘hear’ both signals, significantly increasing the range and reliability.

Specification

Range - 1000 metre wireless range line-of-site
Enclosure - IP66, UV stable, ABS plastic with non-penetrating wall-mounts - translucent lid & neoprene o-ring. Colour RAL7011
RF - 434.075MHz Narrow Band FM
Coding - Security channels 1–16
Power - Supply: 230VAC +/-10% 50Hz Standby <1W. - Output 1 Triac (Leading Edge) rated 1000W Output 2 Relay rated 1000W with zero-volt switching
Size - 225 x 185 x 85mm
CE Compliance - EN 50081 – 1, To EN 50082 – 1